The Import tool is a valuable tool to help user to keep their data in-sync with roads and highways as the collection process proceeds. The following diagram shows a typical process overview for the Time Delayed Import Tool (TDIT).
In this step the field crews will collect data based on their data collection. It is assumed that this process takes enough time that one or more LRS Interface runs will have been made during this step. If not, a normal import process is sufficient. The data collected needs to have a date or indication of LRS version used for data collection.
Once the data has finished being collected it is imported via standard methods to a Staging table made for that purpose
NOTE: Because this data does not match AgileAssets system LRS, the staging table is not a "location" table (i.e., with LOC_IDENT column). It is a "general" table with explicit ROUTE_NAME, OFFSET_FROM, OFFSET_TO columns. Minimum required columns are described in the later sections.
Note that steps 3-7 are depicted in the same color. This is to emphasize that these are all encapsulated within one automated command (System Job in AgileAssets system). It is only broken into separate steps in this document for clarity. Note that the automated portion of this import assumes that the Staging table has already been populated.
Each Event classification configured in the Roads and Highways Interface has a pair of associated tables – one for point events and one for linear events. These are already registered with Roads and Highways as part of the configuration of the LRS Interface. In this step, AgileAssets will copy the location data from the Staging table to these Events-To-Be-Relocated tables.
AgileAssets will invoke the Relocate Events web services which returns CSV files with the updated location data. AgileAssets will then use that data to populate the 2 Event buffer tables. The “From” date given to the web services will be the date stored during Step 1. The “To” date has 3 options: 1) Last successful LRS Gateway Date; 2) Today; 3) A fixed date.
Next AgileAssets will update the location data in the Staging table with the location data in the Event buffer tables.
In this step, AgileAssets will continue to update the Staging table with any events that were split or deleted. Appropriate columns will be proportionally updated based on their Column settings. Deleted records will be marked as such in the Staging table.
Because TDIT only processes the data in the staging table (not a LOC_IDENT table), it is usually followed by an separate standard import that uses the Staging table as the data source to the final target table (usually the table with LOC_IDENT column)
The TDIT tool uses ESRI's Relocate Events web services to update event locations prior to importing data into PMS. The web service works by making AgileAssets events available to the tool, by a combination of utilizing ArcGIS Server, Roads and Highways, and AgileAssets application.
Setup of the RelocateEvent REST services for TDIT on Roads and Highways is very similar to setting up the Relocate Event services for AgileAssets Roads and Highways interface, with the only difference being that they are using different external event tables.
Similar to the Standard R&H Interface, two External event tables from the AgileAssets application schema need to be registered to the Advanced Linear Reference System (ALRS). These two tables have already been created in AgileAssets schema. Use Default version of LRS network when registering as well.
The directions for registering External events to Roads and Highways can be found on the Esri website (https://desktop.arcgis.com/en/arcmap/latest/extensions/roads-and-highways/registering-an-external-event-source.htm).
The process is the same as creating the Relocate Event services for standard R&H Interface, except that:
The process of creating the web service from the Relocate Event tool is the same as those created for the R&H Interface, but with different instances and data sources for the services.
After creating the service, provide AgileAssets with the 2 URLs (one for Line event and one of Point event).
The system job for the time delayed import transformation requires the following specific columns to be available in the staging table for the job to process the data. The column names are specified in the job and so don’t need a static name.
Recommended Column ID
Column name containing values for ROUTE_NAME in SETUP_NETWORK_LINES (or ROUTE_ID field ins RnH).
Same as SETUP_NETWORK_LINES.ROUTE_NAME
Column name containing values for From Measure (milepoint) of the segment
Same as SETUP_NETWORK_LINES.OFFSET_FROM
Column name containing values for To Measure (milepoint) of the segment
Same as SETUP_NETWORK_LINES.OFFSET_TO
Column name containing values for the date of the LRS that data was captured against
LRS update date column name. This column will be updated with the date any LRS changes were made
This column will be updated with the type of LRS change made to the data
|Note: The staging table is NOT a location table (i.e., without LOC_IDENT column). It is usually configured with ROUTE_NAME, OFFSET_FROM, OFFSET_TO as the Primary Key or Unique Index.|
Each staging table will have its own system job to apply the TDIT transformation.
In Step 2, be sure to use the columns specified below with the Source staging table you want updated. Below is an example configuration.
System Job Argument
Source Staging table
The staging table where the data is imported to
Base external Esri RnH table names
The Base External Esri RnH tables name is the base name of the registered external event table. By default, it is NET_EXT_TRANS_EVENT. System will then use NET_EXT_TRANS_EVENT_PT table for point and NET_EXT_TRANS_EVENT_LN table for lines.
Web service URL for Esri RnH RelocateEvent (Point)
TDIT R&H Relocate Event service (Point) URL published on ArcGIS server
Web service URL for Esri RnH RelocateEvent (Line)
TDIT R&H Relocate Event service (Line) URL published on ArcGIS server
Column name containing values for ROUTE_NAME
Column name in staging table that stores Route ID from RnH
Column name containing values for OFFSET_FROM
Column name in staging table that stores Begin Milepoint (or From Measure)
Column name containing values for OFFSET_TO
Column name in staging table that stores End Milepoint (or To Measure)
Column name containing values for LRS_DATE
Column name in staging table that stores the LRS Date of the data, by default LRS_DATE
LRS update column name
Column name in staging table that will store the LRS Change Date returned from RnH, by default LRS_CHANGE_DATE
Column name containing event modification type
Column name in staging table that will store the type of change returned from RnH (such as “RETIRE”, “SPLIT” etc.), by default LRS_CHANGE_STATUS
LRS view date (optional)
Only used if “LRS View Date Type” is using “Forward data to a future LRS date – fixed date”. Otherwise it can be set to any date.
LRS view date type
“LRS View Date Type” parameter has 3 options: